Double Glazing Locks Repair
If a double-glazed window does not close, it causes drafts that allow heat to escape. It also reduces the security of your home and exposes you to burglary.
Double-glazed window seals, hinges, and handles can break down over time. If this is the case, it can affect the performance of your windows and invalidate any warranties you may have.
Faulty locks
Many people put anti-burglar systems on their main doors and gates However, they tend to overlook that windows are the most frequent targets for burglars. Poorly secured locks can cause drafts, allow valuable heat escape and compromise the security of your house.
If you find that your uPVC window locks are not functioning, there is an excellent chance that the lock mechanism is blocked. This is usually caused by an issue with a gearbox component. This could cause the handle to not open, but instead to rotate 360 degrees. This is a problem that is common with uPVC windows, but it can also happen in tilt-and turn windows and sliding sash window.
If this happens, release the lock by pressing the lever handle. This can be used to unblock the gearbox and restore the window's opening. If this doesn't work then you might need to replace the entire mechanism of the window lock.
Most modern uPVC windows use espagnolette locks. These are an internal locking system that secures the window by using locking cams that resemble mushrooms that are inserted into the frame. The handle is the trigger for the gearbox, which activates the cams for either upward or down movement. The spindle of the lock could break which causes the handle to move, but the window to close or open.
A faulty transmission can also cause your window to appear locked, but it is not. This can occur when the centre rods, also known as crocodile teeth fixings in the gearbox snap off. If this is the situation, Misty Glaze can supply and install replacement rods in order to restore the function of your window.
It is essential not to try to force a stuck or broken lock. This can cause a lock to snap or break in particular if you are using windows made of uPVC which expands and contracts when temperatures change. It is recommended to contact an expert locksmith who will determine the issue and repair it.
Sticky Doors/Window
It's a nuisance to have doors and windows that stick and sag, but they can also be indicative of more serious structural issues. If you are unable to open or close a door or window it is crucial to seek professional help as soon as possible. The problem could result from a variety of causes such as foundation settlement or a lack of support for the crawl space.
Frame problems or humidity could cause windows and doors to stick. If your frames are wood, for instance, they may become brittle when exposed to moisture. Even if the hardware appears good, this can make it difficult to open and close your frames. In this case, the wood swells and presses against the hinges, causing friction.
If your door or window sticks in the summer, try rubbing it with bar soap to reduce the friction. It will shrink and could temporarily resolve the issue. This solution may need to be repeated periodically during periods of high moisture.
Sanding the frame of the door or window to a smooth surface is a more permanent solution. This can be done by hand or using an electric tool. A professional can also stain and sand or paint your door or window frame to make it appear new again.
If soaping or sanding don't solve the problem, it could be caused by foundation settlement or a compromised crawlspace. The first thing you should do is look for cracks in the area. It's time to call an expert in foundation if you see any of these signs. Damage to the foundation can lead to uneven floors, a misaligned wall and doors and windows that are stuck. To avoid the need for expensive and dangerous repairs, it's crucial to address these issues as soon as you can. These issues can escalate until your home becomes structurally unstable if left unattended. Contact the Southeast's most renowned foundation repair experts today to arrange an inspection and repair service!
Cracking/Blowing Issues
When double glazing starts to degrade, it can cause cracks to appear. It can be unappealing and it also allows all the heat that has been stored within your home to escape. double glazing repairs near me could also pose an injury risk to your family as the glass pieces can cause injury in the event of a break. It is best to fix double-glazing windows that have a crack prior to them become worse. This can increase the cost of replacement.
Window seals are vital to keep air between your window panes, and also to stop drafts from entering your home. However, over time these can become perished or shrink due to weather changes. If not taken care of, it could result in condensation, moisture, and draughts in your home.
This issue can usually be solved by a professional. They can replace the window seal and restore your windows back to their original state of repair. They will also suggest features that will reduce future stress cracks, for example trickle ventilation for better ventilation.
You could also try lubricating the hinges and handles on your doors and windows. This will enable them to move more easily and allow the lock to function as it was intended. Rub some lubricating oils on a cloth that is free of lint and then rub them into the hinges, handle mechanism and areas where they pass through frames (for instance, a sash window). You can also take off the handles and clean them with soapy water to get rid of any dirt or dirt.
It is essential to speak with an expert if your uPVC windows and doors are not working as they should. They can find the issue quickly and then resolve it within a short amount of time. It's safer and less expensive than attempting to fix it yourself and could cause damage to the mechanism. It will also give you peace of mind knowing your home is safe and secure.